Основы Juniper cli¶
Навигация¶
Режимы работы:¶
operational mode - операционный режим.¶
В нем можно посмотреть текущую конфигурации,
текущее состояние протоколов IGP, BGP и пр.
admin@MBR>
configuration mode - конфигурационный режим.¶
В нем, как понятно из названия, настраивается конфигурация
admin@MBR>configure
admin@MBR#
# либо через edit
admin@MBR>edit
admin@MBR#
Команды просмотра/выбора из конфигурации¶
!Матчинг по ключевым словам
show configuration | display set | match "КЛЮЧЕВОЕ СЛОВО"
shell - режим шелла.¶
По сути в нем просто проваливаешься в JunOS,
каковая являтся запиленным и протюниным FreeBSD.
В нем есть набор стандартных доступных команд Unix, тип top, uname и пр...
P.S. midnight commander мне туда поставить не удалось )
admin@MBR>start shell
admin@MBR> start shell
% uname -a
JUNOS MBR 19.4R3.11 JUNOS 19.4R3.11 #0: 2020-10-08 21:58:24 UTC
builder@qnc-jre-emake1t.juniper.net:/volume/build/junos/19.4/
release/19.4R3.11/obj/powerpc/junos/bsd/kernels/JUNIPER-PPC/kernel powerpc
Общая структура конфига¶
Как правило конфиг состоит из следующих секций:
system {
host-name MBR;
root-authentication {
encrypted-password /* SECRET-DATA */; ## SECRET-DATA
}
login {
class read-only-local {
permissions [ view view-configuration ];
allow-commands "ping|traceroute";
}
user admin {
uid 2000;
class super-user;
authentication {
encrypted-password /* SECRET-DATA */; ## SECRET-DATA
}
}
}
services {
ssh;
telnet;
}
domain-name mydomain.ru;
time-zone Asia/Bangkok;
no-redirects;
name-server {
10.10.10.10;
10.10.10.11;
}
syslog {
user * {
any emergency;
}
host 11.11.11.11 {
any info;
facility-override local7;
}
source-address lo.lo.lo.lo;
}
ntp {
boot-server 12.12.12.12;
server 12.12.12.12;
source-address lo.lo.lo.lo;
}
}
chassis {
aggregated-devices {
ethernet {
device-count 1;
}
}
fpc 0 {
pic 0 {
framing lan;
}
}
fpc 1 {
pic 0 {
framing lan;
}
}
}
security {
authentication-key-chains {
key-chain isis-sec {
key 1 {
secret /* SECRET-DATA */; ## SECRET-DATA
start-time "1999-12-31.23:00:00 +0700";
algorithm md5;
options basic;
}
}
}
}
interfaces {
xe-0/0/0 {
description "<< Ae0 10GE to N0 1/1 Po2 >>";
framing {
lan-phy;
}
gigether-options {
802.3ad ae0;
}
}
xe-0/0/1 {
description "<< Ae0 10GE to N0 1/2 Po2 >>";
framing {
lan-phy;
}
gigether-options {
802.3ad ae0;
}
}
xe-0/0/2 {
description "<< Ae0 10GE to N1 1/1 Po2 >>";
framing {
lan-phy;
}
gigether-options {
802.3ad ae0;
}
}
xe-0/0/3 {
description "<< Ae0 10GE to N1 1/2 Po2 >>";
framing {
lan-phy;
}
gigether-options {
802.3ad ae0;
}
}
ae0 {
description "<< 4x10GE to N0/1 Po2 >>";
flexible-vlan-tagging;
mtu 1522;
encapsulation flexible-ethernet-services;
aggregated-ether-options {
lacp {
active;
}
}
unit 16 {
description "<< Desc16 >>";
vlan-id 16;
family inet {
address 16.16.16.3/30;
}
}
unit 100 {
description "<< Desc100 >>";
vlan-id 100;
family inet {
address 100.100.100.3/30;
}
}
unit 200 {
description "<< Desc200 >>";
vlan-id 200;
family inet {
address 200.200.200.3/30;
}
}
unit 201 {
description "<< Desc201 >>";
vlan-id 201;
family inet {
address 201.201.201.3/30;
}
}
unit 900 {
description "<< Desc900 >>";
vlan-id 900;
family inet {
address 16.16.16.3/30;
}
}
}
fxp0 {
unit 0 {
family inet {
address m.g.m.t/24;
}
}
}
lo0 {
description BGP;
unit 0 {
family inet {
filter {
input ACL;
}
address lo.lo.lo.lo/32;
}
}
}
}
}
snmp {
location DefaultCity;
community my_comm {
authorization read-only;
clients {
14.14.14.14/32;
}
}
}
forwarding-options {
sampling {
sample-once;
input {
rate 10;
run-length 0;
}
family inet {
output {
flow-server 15.15.15.15 {
port 9996;
source-address lo.lo.lo.lo;
version 5;
}
}
}
}
}
policy-options {
prefix-list AS11111 {
1.0.0.0/23;
2.0.0.0/24;
}
policy-statement BOGONS {
term rfc6890 {
from {
route-filter 10.0.0.0/8 orlonger accept;
route-filter 172.16.0.0/12 orlonger accept;
route-filter 192.168.0.0/16 orlonger accept;
}
}
term default {
then reject;
}
}
policy-statement REJECT_ALL {
then reject;
}
policy-statement PS-1 {
term AS11111 {
from {
route-filter 111.111.111.0/24 exact;
}
then accept;
}
}
}
firewall {
filter ACL {
term terminal-access {
from {
source-address {
/* OoBM network */
20.20.20.0/24;
/* Office GW */
30.30.30.30/32;
}
protocol tcp;
port [ ssh telnet ];
}
then accept;
}
term terminal-access-default {
from {
protocol tcp;
port [ ssh telnet ];
}
then {
discard;
}
}
term trusted {
from {
source-prefix-list {
TRUSTED_NETWORK;
}
}
then accept;
}
term icmp {
from {
protocol icmp;
}
then {
policer ICMP_POLICER;
count ICMP_POLICER;
accept;
}
}
term snmp {
from {
source-address {
40.40.40.40/32;
}
protocol udp;
port snmp;
}
then accept;
}
term default {
then {
discard;
}
}
}
filter SAMPLE {
interface-specific;
term default {
then {
sample;
accept;
}
}
}
}
}
routing-options {
static {
route 0.0.0.0/0 {
qualified-next-hop 50.50.50.50 {
preference 100;
}
qualified-next-hop 60.60.60.60 {
preference 90;
}
}
/* <static example */
route 50.50.50.0/25 next-hop 11.11.11.11;
router-id lo.lo.lo.lo;
autonomous-system 11111;
aggregate {
route 1.0.0.0/19 passive;
route 2.2.2.0/26 passive;
}
}
protocols {
ospf {
area 0.0.0.0 {
interface lo0.0;
interface ae0.16;
interface ae0.900;
}
}
bgp {
group EXTERNAL_PEER {
type external;
passive;
import [ PS-1 PS-2 ];
family inet {
unicast {
prefix-limit {
maximum 1000000;
teardown 95;
}
}
}
export [ PS-3 REJECT_ALL ];
neighbor 100.100.100.1 {
description "== EXTERNAL NEIGHBOR 1 ==";
local-address 100.100.100.2 ;
peer-as 50427;
group INTERNAL_PEER {
type internal;
family inet {
unicast {
prefix-limit {
maximum 2000;
teardown 90;
}
}
}
export [ PS-4 PS-5 REJECT_ALL ];
neighbor 200.200.200.1 {
description "== INTERNAL NEIGHBOR 1 ==";
local-address 200.200.200.2;
import [ PS-6 REJECT_ALL ];
}
neighbor 201.201.201.1 {
description "== INTERNAL NEIGHBOR 2 ==";
local-address 201.201.201.2;
import [ PS-7 REJECT_ALL ];
}
}
}
lldp {
interface xe-0/0/0;
interface xe-0/0/1;
interface xe-0/0/2;
interface xe-0/0/3;
}
}
Каждая секция несет свой функционал. Например в секции "interfaces" как не трудно догадаться из названия перечисляются интерфейсы как физические так и логические.
Заметка
У джуна портчаны называются aggregated ethernet, например ae0
Навигация по конфигу¶
ВСЁ ОЧЕНЬ УДОБНО!!! )
# из operational mode
show configuration <секция_в_конфиге подсекция_в_конфиге
под_подсекция_в_конфиге и т.д...>
# пример показа lo0
admin@MBR> show configuration interfaces lo0
description BGP;
unit 0 {
family inet {
filter {
input ACL;
}
address lo.lo.lo.lo/32;
}
}
# из configuration mode
show <секция_в_конфиге подсекция_в_конфиге под_подсекция_в_конфиге
и т.д...>
# пример показа lo0
admin@MBR>edit
admin@MBR# show interfaces lo0
description BGP;
unit 0 {
family inet {
filter {
input ACL;
}
address lo.lo.lo.lo/32;
}
}
Редактирование конфига¶
Я для себя определил 2 удобных режима
1. load merge/update terminal (relative)¶
Загружает конфиг из терминала в нужную секцию
relative
Параметр "relative" нужен для того, чтобы указывать, что вносимые изменения относятся к текущему контексту редактирования. Без параметра "relative" Джун будет считать что постится конфиг от корня конфигурации
1.1. load merge terminal relative¶
Добавляет конфигурацию путем слияния существущей и новой
Постим в нужном месте кусок своей конфигурации
1.2. load update terminal relative¶
Добавляет конфигурацию путем удаления существущей и добавлением новой
Постим в нужном месте кусок своей конфигурации
2. set/delete¶
Перемещаемся в нужное место конфига,
вносим/удаляем новые параметры через команду "set/delete"
Примеры¶
Пример использования load merge terminal relative
Необходимо создать новый сабинтерфейс 900 в ae0
* Заходим в configure mode и перемещаемся в секцию interfaces ae0
admin@MBR>edit
admin@MBR#edit interface ae0
[edit interfaces ae0]
Примечание: для того, чтобы завершить ввод в терминале необходимо ввести комбинацию Ctrl-D
admin@MBR# load merge terminal relative
[Type ^D at a new line to end input]
unit 900 {
description "<< Desc900 >>";
vlan-id 900;
family inet {
address 16.16.16.3/30;
}
}
load complete
[edit interfaces ae0]
admin@MBR# top
[edit ]
admin@MBR# show | compare
[edit interfaces ae0]
+ unit 900 {
+ description "<< Desc900 >>";
+ vlan-id 900;
+ family inet {
+ address 16.16.16.3/30;
+ }
+ }
admin@MBR# commit
commit complete
[edit]
admin@MBR# quit
Exiting configuration mode
admin@MBR0>
Пример использования set/delete
Необходимо поменять ip адрес в ae0.900
* Заходим в configure mode и перемещаемся в секцию interfaces ae0
admin@MBR>edit
admin@MBR#edit interface ae0 unit900 family inet
admin@MBR#delete address 16.16.16.3/30
admin@MBR#set address 17.17.17.3/30
admin@MBR# show | compare
[edit interfaces ae0 unit 900 family inet]
- address 16.16.16.3/30;
+ address 17.17.17.3/30;
admin@MBR# commit
commit complete
[edit]
admin@MBR# quit
Exiting configuration mode
admin@MBR0>
Commit/Rollback¶
show | compare¶
"Просмотр изменений до комитта"
admin@MBR# show | compare
[edit interfaces ae0 unit 900 family inet]
- address 16.16.16.3/30;
+ address 17.17.17.3/30;
show | compare rollback 1¶
"Посмотреть незакоммиченные данные на одну итерацию до текущего коммита"
show | compare rollback 1
Отмена незакоммченных изменений¶
rollback 0
rollback 1¶
Важно!
При откате к предыдущему коммиту небходимо делать после этого commit - обязателено! По сути "rollback" - загружает конфиг, но не применяет его. Как раз применяет конфиг команда "commit"
"Откатить конфиг к предыдущему состоянию"
rollback 1
"для применения данного rolback-а нужно сделать 'commit'"
commit
rollback 2¶
"Откат изменений на 2 итерации назад"
rollback 2
commit check¶
"Проверка валидности конфига перед коммитом"
commit check
commit¶
"Применить изменения"
commit
commit | display detail
"Можно посмотреть в деталях,"
"что происходит под капотом внутри коробки при применения commit"
"commit | display detail"
2022-02-01 12:07:21.222603 +03: Obtaining lock for commit
2022-02-01 12:07:21.259285 +03: merging latest committed configuration
2022-02-01 12:07:21.259561 +03: Using fast-diff method to generate diff
2022-02-01 12:07:21.427182 +03: UI extensions feature is not configured
2022-02-01 12:07:21.427404 +03: Started running translation script
2022-02-01 12:07:21.485967 +03: No delta input for translation
2022-02-01 12:07:21.486049 +03: Finished running translation script
2022-02-01 12:07:21.486219 +03: start loading commit script changes
2022-02-01 12:07:21.486288 +03: no commit script changes
2022-02-01 12:07:21.486354 +03: no transient commit script changes
2022-02-01 12:07:21.486411 +03: finished loading commit script changes
2022-02-01 12:07:21.486454 +03: No translation output from the scripts
2022-02-01 12:07:21.486484 +03: Preparing Fast-diff post translation load
2022-02-01 12:07:21.486926 +03: building groups inheritance path proportional in candidate db
2022-02-01 12:07:21.487157 +03: finished groups inheritance path
2022-02-01 12:07:21.487196 +03: copying juniper.db to juniper.data+
2022-02-01 12:07:21.534980 +03: finished copying juniper.db to juniper.data+
2022-02-01 12:07:21.535143 +03: exporting juniper.conf
2022-02-01 12:07:21.686577 +03: expanding interface-ranges
2022-02-01 12:07:21.686657 +03: finished expanding interface-ranges
2022-02-01 12:07:21.686699 +03: setup foreign files
2022-02-01 12:07:21.695674 +03: propagating foreign files
2022-02-01 12:07:21.942159 +03: constraints passed in mustd - not checking constraints in propagation
2022-02-01 12:07:21.951389 +03: complete foreign files
2022-02-01 12:07:21.996461 +03: dropping unchanged foreign files
2022-02-01 12:07:21.996584 +03: start ffp propagate
2022-02-01 12:07:22.19420 +03: executing 'ffp propagate'
2022-02-01 12:07:22.20634 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:22.22631 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:22.35445 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:22.46359 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:22.71007 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:22.71520 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:22.82624 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:22.83942 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:22.84508 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:22.85134 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:22.96771 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:22.97302 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:22.108417 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:22.119233 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:22.148499 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:22.149076 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:22.160414 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:22.161886 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:22.162486 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:22.163086 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:22.165586 +03: finish ffp propagate
2022-02-01 12:07:22.165842 +03: daemons checking new configuration
2022-02-01 12:07:22.166104 +03: Spawning Routing protocols process to check new configuration
2022-02-01 12:07:22.167794 +03: Spawning Chassis control process to check new configuration
2022-02-01 12:07:22.169679 +03: sending commit-check command to Firewall process(26916)
2022-02-01 12:07:22.170700 +03: sending commit-check command to Interface control process(26911)
2022-02-01 12:07:22.173243 +03: Collecting status of Interface control process
2022-02-01 12:07:22.388247 +03: Spawning Simple Network Management Protocol process to check new configuration
2022-02-01 12:07:22.413153 +03: Collecting status of Simple Network Management Protocol process
2022-02-01 12:07:22.413430 +03: Spawning Management Information Base II process to check new configuration
2022-02-01 12:07:22.432746 +03: Collecting status of Chassis control process
2022-02-01 12:07:22.436716 +03: Spawning SONET Automatic Protection Switching process to check new configuration
2022-02-01 12:07:22.441093 +03: Collecting status of Management Information Base II process
2022-02-01 12:07:22.441366 +03: Spawning Virtual Router Redundancy Protocol process to check new configuration
2022-02-01 12:07:22.454532 +03: Collecting status of SONET Automatic Protection Switching process
2022-02-01 12:07:22.455788 +03: Spawning Packet Forwarding Engine statistics management process to check new configuration
2022-02-01 12:07:22.474754 +03: Collecting status of Virtual Router Redundancy Protocol process
2022-02-01 12:07:22.475997 +03: Spawning Traffic sampling control process to check new configuration
2022-02-01 12:07:22.497279 +03: Collecting status of Packet Forwarding Engine statistics management process
2022-02-01 12:07:22.498371 +03: Spawning Remote operations process to check new configuration
2022-02-01 12:07:22.505934 +03: Collecting status of Traffic sampling control process
2022-02-01 12:07:22.507738 +03: Spawning Redundancy interface management process to check new configuration
2022-02-01 12:07:22.525476 +03: Collecting status of Redundancy interface management process
2022-02-01 12:07:22.526949 +03: Spawning Dynamic flow capture service to check new configuration
2022-02-01 12:07:22.533345 +03: Collecting status of Remote operations process
2022-02-01 12:07:22.534597 +03: Spawning Enhanced Session Management process to check new configuration
2022-02-01 12:07:22.549692 +03: Collecting status of Dynamic flow capture service
2022-02-01 12:07:22.550145 +03: Spawning Subscriber management process to check new configuration
2022-02-01 12:07:22.586900 +03: Collecting status of Subscriber management process
2022-02-01 12:07:22.588087 +03: Spawning Ethernet Clock Synchronization Process to check new configuration
2022-02-01 12:07:22.669661 +03: Collecting status of Ethernet Clock Synchronization Process
2022-02-01 12:07:22.670579 +03: Spawning App-engine virtual machine management process to check new configuration
2022-02-01 12:07:22.698832 +03: Collecting status of App-engine virtual machine management process
2022-02-01 12:07:22.699460 +03: Spawning Kernel offload daemon to check new configuration
2022-02-01 12:07:22.706548 +03: Collecting status of Routing protocols process
2022-02-01 12:07:22.708652 +03: Spawning SCC Chassisd Process to check new configuration
2022-02-01 12:07:22.714793 +03: Collecting status of Enhanced Session Management process
2022-02-01 12:07:22.716314 +03: Spawning Logical system multiplexer process to check new configuration
2022-02-01 12:07:22.722478 +03: Collecting status of Kernel offload daemon
2022-02-01 12:07:22.723654 +03: Spawning Layer 2 address flooding and learning process to check new configuration
2022-02-01 12:07:22.754311 +03: Collecting status of Logical system multiplexer process
2022-02-01 12:07:22.755496 +03: Spawning Layer 2 Control Protocol process to check new configuration
2022-02-01 12:07:22.784293 +03: Collecting status of SCC Chassisd Process
2022-02-01 12:07:22.790784 +03: Collecting status of Layer 2 address flooding and learning process
2022-02-01 12:07:22.856217 +03: Collecting status of Firewall process
2022-02-01 12:07:22.869230 +03: Collecting status of Layer 2 Control Protocol process
2022-02-01 12:07:22.907787 +03: updating shared candidate configuration
2022-02-01 12:07:22.909063 +03: Rebuilding groups inheritance path proportional in candidate db
2022-02-01 12:07:22.909263 +03: Finished rebuilding groups inheritance pathin candidate db
2022-02-01 12:07:22.909452 +03: updating commit revision
2022-02-01 12:07:23.119573 +03: obtaining db lock on re1
2022-02-01 12:07:23.420647 +03: re-revision: re0-1648708549-1851, other-re-revision: re0-1648708549-1851(0)
2022-02-01 12:07:23.420802 +03: UI extensions feature is not configured
configuration check succeeds
2022-02-01 12:07:23.445773 +03: executing 'ffp synchronize'
2022-02-01 12:07:23.447090 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:23.447837 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:23.459064 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:23.470237 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:23.496468 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:23.497260 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:23.508544 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:23.509891 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:23.510468 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:23.511015 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:23.511983 +03: copying file '//var/etc/stp_context.id+' to 're1'
2022-02-01 12:07:23.637757 +03: copying file '//var/etc/stp_all_port.id+' to 're1'
2022-02-01 12:07:23.761755 +03: copying file '//var/etc/non_stp_port.id+' to 're1'
2022-02-01 12:07:23.989715 +03: copying file '//var/etc/mobile_addr_assignment.id+' to 're1'
2022-02-01 12:07:24.115447 +03: copying file '//var/etc/if_alias_map+' to 're1'
2022-02-01 12:07:24.239696 +03: copying file '//var/etc/stp_port.id+' to 're1'
2022-02-01 12:07:24.364347 +03: copying file '//var/etc/stp_ae_port.id+' to 're1'
2022-02-01 12:07:24.488661 +03: copying file '//var/etc/stp_port.id+' to 're1'
2022-02-01 12:07:24.614933 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:24.615556 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:24.627187 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:24.638753 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:24.664662 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:24.665193 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:24.676699 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:24.678077 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:24.678669 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:24.679357 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:24.681603 +03: sending pull-configuration rpc to re1
2022-02-01 12:07:24.681711 +03: filename /var/run/db/private/juniper-99260.patch, size 287
2022-02-01 12:07:24.930650 +03: pull-configuration success. URL: /var/tmp/juniper-99260.patch
2022-02-01 12:07:24.930740 +03: sending load-patch rpc to re1
2022-02-01 12:07:25.30605 +03: remote load-configuration success on re1
2022-02-01 12:07:25.30665 +03: sending file-delete rpc to re1
2022-02-01 12:07:25.134623 +03: syncing commit db revision to re1
2022-02-01 12:07:25.134687 +03: asking re1 to commit
re1:
2022-02-01 12:07:25.611523 +03: Obtaining lock for commit
2022-02-01 12:07:25.612632 +03: updating commit revision
2022-02-01 12:07:25.612908 +03: Started running translation script
2022-02-01 12:07:25.612949 +03: Finished running translation script
2022-02-01 12:07:25.613057 +03: start loading commit script changes
2022-02-01 12:07:25.613107 +03: no commit script changes
2022-02-01 12:07:25.613149 +03: no transient commit script changes
2022-02-01 12:07:25.613210 +03: finished loading commit script changes
2022-02-01 12:07:25.613580 +03: building groups inheritance path proportional in candidate db
2022-02-01 12:07:25.613795 +03: finished groups inheritance path
2022-02-01 12:07:25.613866 +03: copying juniper.db to juniper.data+
2022-02-01 12:07:25.664659 +03: finished copying juniper.db to juniper.data+
2022-02-01 12:07:25.664810 +03: exporting juniper.conf
2022-02-01 12:07:25.811948 +03: expanding interface-ranges
2022-02-01 12:07:25.812017 +03: finished expanding interface-ranges
2022-02-01 12:07:25.812093 +03: setup foreign files
2022-02-01 12:07:25.817678 +03: propagating foreign files
2022-02-01 12:07:26.60812 +03: constraints passed in mustd - not checking constraints in propagation
2022-02-01 12:07:26.69655 +03: complete foreign files
2022-02-01 12:07:26.119194 +03: dropping unchanged foreign files
2022-02-01 12:07:26.119293 +03: start ffp propagate
2022-02-01 12:07:26.141125 +03: executing 'ffp propagate'
2022-02-01 12:07:26.142303 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:26.144306 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:26.157144 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:26.167934 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:26.192585 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:26.193085 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:26.204476 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:26.205816 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:26.206386 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:26.207053 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:26.214181 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:26.214679 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:26.225840 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:26.237640 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:26.270817 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:26.271569 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:26.283700 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:26.285265 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:26.285842 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:26.286458 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:26.288804 +03: finish ffp propagate
2022-02-01 12:07:26.288956 +03: daemons checking new configuration
2022-02-01 12:07:26.289145 +03: Spawning Routing protocols process to check new configuration
2022-02-01 12:07:26.290297 +03: Spawning Chassis control process to check new configuration
2022-02-01 12:07:26.292071 +03: sending commit-check command to Firewall process(26836)
2022-02-01 12:07:26.292673 +03: sending commit-check command to Interface control process(26826)
2022-02-01 12:07:26.293940 +03: Collecting status of Interface control process
2022-02-01 12:07:26.467771 +03: Spawning Simple Network Management Protocol process to check new configuration
2022-02-01 12:07:26.469241 +03: Collecting status of Chassis control process
2022-02-01 12:07:26.469534 +03: Spawning Management Information Base II process to check new configuration
2022-02-01 12:07:26.489617 +03: Collecting status of Simple Network Management Protocol process
2022-02-01 12:07:26.489969 +03: Spawning Virtual Router Redundancy Protocol process to check new configuration
2022-02-01 12:07:26.494335 +03: Collecting status of Management Information Base II process
2022-02-01 12:07:26.494755 +03: Spawning Packet Forwarding Engine statistics management process to check new configuration
2022-02-01 12:07:26.515297 +03: Collecting status of Virtual Router Redundancy Protocol process
2022-02-01 12:07:26.515701 +03: Spawning Enhanced Session Management process to check new configuration
2022-02-01 12:07:26.522591 +03: Collecting status of Packet Forwarding Engine statistics management process
2022-02-01 12:07:26.522896 +03: Spawning Subscriber management process to check new configuration
2022-02-01 12:07:26.545184 +03: Collecting status of Subscriber management process
2022-02-01 12:07:26.545392 +03: Spawning Ethernet Clock Synchronization Process to check new configuration
2022-02-01 12:07:26.589533 +03: Collecting status of Ethernet Clock Synchronization Process
2022-02-01 12:07:26.589984 +03: Spawning App-engine virtual machine management process to check new configuration
2022-02-01 12:07:26.607531 +03: Collecting status of App-engine virtual machine management process
2022-02-01 12:07:26.607902 +03: Spawning Logical system multiplexer process to check new configuration
2022-02-01 12:07:26.626891 +03: Collecting status of Logical system multiplexer process
2022-02-01 12:07:26.627398 +03: Spawning Layer 2 address flooding and learning process to check new configuration
2022-02-01 12:07:26.650501 +03: Collecting status of Enhanced Session Management process
2022-02-01 12:07:26.651229 +03: Spawning Layer 2 Control Protocol process to check new configuration
2022-02-01 12:07:26.666423 +03: Collecting status of Layer 2 address flooding and learning process
2022-02-01 12:07:26.689451 +03: Collecting status of Routing protocols process
2022-02-01 12:07:26.713803 +03: Collecting status of Layer 2 Control Protocol process
2022-02-01 12:07:27.419038 +03: Collecting status of Firewall process
2022-02-01 12:07:27.419190 +03: commit wrapup...
2022-02-01 12:07:27.419319 +03: activating '/var/etc/ntp.conf'
2022-02-01 12:07:27.419616 +03: start ffp activate
2022-02-01 12:07:27.441427 +03: executing 'ffp activate'
2022-02-01 12:07:27.442566 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:27.443295 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:27.454189 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:27.464992 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:27.489481 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:27.489977 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:27.501009 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:27.502335 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:27.502890 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:27.503512 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:27.505024 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:27.505517 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:27.516314 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:27.526991 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:27.556495 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:27.557104 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:27.568247 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:27.591703 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:27.592343 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:27.592946 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:27.594795 +03: activating '/var/etc/keyadmin.conf'
2022-02-01 12:07:27.598389 +03: activating '/var/etc/pam.conf'
2022-02-01 12:07:27.598594 +03: activating '/var/etc/pam_radius.conf'
2022-02-01 12:07:27.598686 +03: activating '/var/etc/pam_tacplus.conf'
2022-02-01 12:07:27.598784 +03: activating '/var/etc/ifinfo.conf'
2022-02-01 12:07:27.598915 +03: activating '/var/etc/issue'
2022-02-01 12:07:27.599017 +03: activating '/var/etc/certs'
2022-02-01 12:07:27.603266 +03: activating '/var/etc/motd'
2022-02-01 12:07:27.605788 +03: activating '/var/etc/ifmdata.conf'
2022-02-01 12:07:27.605996 +03: activating '/var/etc/max-db-size-cfg'
2022-02-01 12:07:27.606162 +03: activating '/var/etc/subs-mgmt-cfg'
2022-02-01 12:07:27.606271 +03: activating '/var/etc/vmm.conf'
2022-02-01 12:07:27.606353 +03: activating '/var/etc/db_ext-cfg'
2022-02-01 12:07:27.606487 +03: activating '/var/etc/ephinst.conf'
2022-02-01 12:07:27.606611 +03: activating '/var/etc/motd.junos'
2022-02-01 12:07:27.606725 +03: executing foreign_commands
2022-02-01 12:07:27.606777 +03: /bin/sh /etc/rc.ui ui_setup_users (sh)
2022-02-01 12:07:27.614381 +03: not executing ui_commit in rc.ui
2022-02-01 12:07:27.624632 +03: finish ffp activate
2022-02-01 12:07:27.624719 +03: db_groups_info_clear start
2022-02-01 12:07:27.629978 +03: db_groups_info_clear done
2022-02-01 12:07:27.630023 +03: activating '/var/run/db/juniper.data'
2022-02-01 12:07:27.650455 +03: Rotate backup configs
2022-02-01 12:07:27.917023 +03: ssync begins
2022-02-01 12:07:27.925396 +03: ssync ends
2022-02-01 12:07:27.925443 +03: ssync begins
2022-02-01 12:07:27.978638 +03: ssync ends
2022-02-01 12:07:27.978695 +03: notifying daemons of new configuration
2022-02-01 12:07:27.978765 +03: notifying none(0)
2022-02-01 12:07:27.978820 +03: cannot signal 'None process', signal 1, no pid
2022-02-01 12:07:27.978901 +03: notifying rpd(5)
2022-02-01 12:07:27.978989 +03: signaling 'Routing protocols process', pid 26810, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.979080 +03: notifying chassisd(6)
2022-02-01 12:07:27.979208 +03: signaling 'Chassis control process', pid 21014, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.979312 +03: notifying xntpd(7)
2022-02-01 12:07:27.979358 +03: cannot signal 'Network time process', signal 1, no pid
2022-02-01 12:07:27.979414 +03: notifying dfwd(12)
2022-02-01 12:07:27.979501 +03: signaling 'Firewall process', pid 26836, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.979558 +03: notifying dcd(13)
2022-02-01 12:07:27.981096 +03: signaling 'Interface control process', pid 26826, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.981193 +03: notifying snmpd(15)
2022-02-01 12:07:27.991619 +03: signaling 'Simple Network Management Protocol process', pid 26827, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.991981 +03: notifying mib2d(17)
2022-02-01 12:07:27.993823 +03: signaling 'Management Information Base II process', pid 63928, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.994222 +03: notifying vrrpd(19)
2022-02-01 12:07:27.996670 +03: signaling 'Virtual Router Redundancy Protocol process', pid 21036, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:27.997020 +03: notifying pfed(22)
2022-02-01 12:07:28.2266 +03: signaling 'Packet Forwarding Engine statistics management process', pid 21613, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.2732 +03: notifying bbe-smgd(63)
2022-02-01 12:07:28.3218 +03: signaling 'Enhanced Session Management process', pid 21078, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.4205 +03: notifying smid(77)
2022-02-01 12:07:28.6783 +03: signaling 'Subscriber management process', pid 21053, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.6926 +03: notifying transportd(81)
2022-02-01 12:07:28.7400 +03: signaling 'Transport control process', pid 21057, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.7709 +03: notifying clksyncd(83)
2022-02-01 12:07:28.8790 +03: signaling 'Ethernet Clock Synchronization Process', pid 21049, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.9189 +03: notifying sdk-vmmd(88)
2022-02-01 12:07:28.9529 +03: signaling 'App-engine virtual machine management process', pid 21017, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:28.9971 +03: notifying lrmuxd(116)
2022-02-01 12:07:28.10294 +03: cannot signal 'Logical system multiplexer process', signal 1, no pid
2022-02-01 12:07:28.10644 +03: notifying l2ald(121)
2022-02-01 12:07:28.10807 +03: cannot signal 'Layer 2 address flooding and learning process', signal 1, no pid
2022-02-01 12:07:28.10916 +03: notifying l2cpd(123)
2022-02-01 12:07:28.10986 +03: cannot signal 'Layer 2 Control Protocol process', signal 1, no pid
2022-02-01 12:07:28.16477 +03: ssync begins
2022-02-01 12:07:28.25028 +03: ssync ends
2022-02-01 12:07:28.25223 +03: commit complete
commit complete
2022-02-01 12:07:27.637098 +03: commit wrapup...
2022-02-01 12:07:27.637245 +03: activating '/var/etc/ntp.conf'
2022-02-01 12:07:27.637759 +03: start ffp activate
2022-02-01 12:07:27.662025 +03: executing 'ffp activate'
2022-02-01 12:07:27.663222 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:27.664098 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:27.675982 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:27.687159 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:27.712996 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:27.713541 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:27.724918 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:27.726242 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:27.726856 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:27.727506 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:27.729012 +03: Processing shared library: libcommon-filetab-ffp.so
2022-02-01 12:07:27.729802 +03: Processing shared library: libcosd-ffp.so
2022-02-01 12:07:27.742460 +03: Processing shared library: libdfwd-ffp.so
2022-02-01 12:07:27.753963 +03: Processing shared library: libdprofdb-ffp.so
2022-02-01 12:07:27.785472 +03: Processing shared library: libmaster-password-ffp.so
2022-02-01 12:07:27.786306 +03: Processing shared library: liboiu-ffp.so
2022-02-01 12:07:27.798910 +03: Processing shared library: librrdl-ffp.so
2022-02-01 12:07:27.823653 +03: Processing shared library: libvsyncd-ffp.so
2022-02-01 12:07:27.824373 +03: Processing shared library: libntf-agent-ffp.so
2022-02-01 12:07:27.825006 +03: Processing shared library: libmtx-filetab-ffp.so
2022-02-01 12:07:27.827321 +03: activating '/var/etc/keyadmin.conf'
2022-02-01 12:07:27.832174 +03: activating '/var/etc/pam.conf'
2022-02-01 12:07:27.832376 +03: activating '/var/etc/pam_radius.conf'
2022-02-01 12:07:27.832480 +03: activating '/var/etc/pam_tacplus.conf'
2022-02-01 12:07:27.832564 +03: activating '/var/etc/ifinfo.conf'
2022-02-01 12:07:27.832665 +03: activating '/var/etc/issue'
2022-02-01 12:07:27.832756 +03: activating '/var/etc/certs'
2022-02-01 12:07:27.843814 +03: activating '/var/etc/motd'
2022-02-01 12:07:27.845460 +03: activating '/var/etc/ifmdata.conf'
2022-02-01 12:07:27.845556 +03: activating '/var/etc/max-db-size-cfg'
2022-02-01 12:07:27.845667 +03: activating '/var/etc/subs-mgmt-cfg'
2022-02-01 12:07:27.845790 +03: activating '/var/etc/vmm.conf'
2022-02-01 12:07:27.845879 +03: activating '/var/etc/db_ext-cfg'
2022-02-01 12:07:27.846005 +03: activating '/var/etc/ephinst.conf'
2022-02-01 12:07:27.846157 +03: activating '/var/etc/motd.junos'
2022-02-01 12:07:27.846269 +03: executing foreign_commands
2022-02-01 12:07:27.846500 +03: /bin/sh /etc/rc.ui ui_setup_users (sh)
2022-02-01 12:07:27.866667 +03: not executing ui_commit in rc.ui
2022-02-01 12:07:27.878155 +03: finish ffp activate
2022-02-01 12:07:27.878239 +03: Using show | compare method to generate diff
2022-02-01 12:07:29.117585 +03: updating LR database with master changes
2022-02-01 12:07:29.136093 +03: db_groups_info_clear start
2022-02-01 12:07:29.139479 +03: db_groups_info_clear done
2022-02-01 12:07:29.139524 +03: activating '/var/run/db/juniper.data'
2022-02-01 12:07:29.160687 +03: Rotate backup configs
2022-02-01 12:07:29.484168 +03: ssync begins
2022-02-01 12:07:29.492755 +03: ssync ends
2022-02-01 12:07:29.492845 +03: ssync begins
2022-02-01 12:07:29.515164 +03: ssync ends
2022-02-01 12:07:29.515230 +03: notifying daemons of new configuration
2022-02-01 12:07:29.515362 +03: notifying none(0)
2022-02-01 12:07:29.515422 +03: cannot signal 'None process', signal 1, no pid
2022-02-01 12:07:29.515548 +03: notifying rpd(5)
2022-02-01 12:07:29.515759 +03: signaling 'Routing protocols process', pid 26866, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.515847 +03: notifying chassisd(6)
2022-02-01 12:07:29.516061 +03: signaling 'Chassis control process', pid 21029, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.516161 +03: notifying xntpd(7)
2022-02-01 12:07:29.516679 +03: signaling 'Network time process', pid 26865, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.516941 +03: notifying dfwd(12)
2022-02-01 12:07:29.517429 +03: signaling 'Firewall process', pid 26916, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.517660 +03: notifying dcd(13)
2022-02-01 12:07:29.519282 +03: signaling 'Interface control process', pid 26911, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.519618 +03: notifying snmpd(15)
2022-02-01 12:07:29.530217 +03: signaling 'Simple Network Management Protocol process', pid 26914, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.531304 +03: notifying mib2d(17)
2022-02-01 12:07:29.531583 +03: signaling 'Management Information Base II process', pid 26913, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.531895 +03: notifying apsd(18)
2022-02-01 12:07:29.533582 +03: signaling 'SONET Automatic Protection Switching process', pid 26868, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.534154 +03: notifying vrrpd(19)
2022-02-01 12:07:29.535263 +03: signaling 'Virtual Router Redundancy Protocol process', pid 21056, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.536129 +03: notifying pfed(22)
2022-02-01 12:07:29.545177 +03: signaling 'Packet Forwarding Engine statistics management process', pid 26915, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.546028 +03: notifying sampled(25)
2022-02-01 12:07:29.554020 +03: signaling 'Traffic sampling control process', pid 26869, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.554603 +03: notifying rmopd(30)
2022-02-01 12:07:29.562895 +03: signaling 'Remote operations process', pid 26870, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.563790 +03: notifying rdd(44)
2022-02-01 12:07:29.566856 +03: signaling 'Redundancy interface management process', pid 26877, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.567551 +03: notifying dfcd(46)
2022-02-01 12:07:29.568837 +03: signaling 'Dynamic flow capture service', pid 26879, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.569115 +03: notifying bbe-smgd(63)
2022-02-01 12:07:29.569553 +03: signaling 'Enhanced Session Management process', pid 21107, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.569790 +03: notifying smid(77)
2022-02-01 12:07:29.573410 +03: signaling 'Subscriber management process', pid 21086, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.574109 +03: notifying transportd(81)
2022-02-01 12:07:29.577042 +03: signaling 'Transport control process', pid 26918, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.577664 +03: notifying clksyncd(83)
2022-02-01 12:07:29.580129 +03: signaling 'Ethernet Clock Synchronization Process', pid 21079, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.580832 +03: notifying sdk-vmmd(88)
2022-02-01 12:07:29.582469 +03: signaling 'App-engine virtual machine management process', pid 21030, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.582682 +03: notifying kod(93)
2022-02-01 12:07:29.592742 +03: signaling 'Kernel offload daemon', pid 26895, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.604819 +03: notifying scchassisd(100)
2022-02-01 12:07:29.605058 +03: cannot signal 'SCC Chassisd Process', signal 1, no pid
2022-02-01 12:07:29.605265 +03: notifying lrmuxd(116)
2022-02-01 12:07:29.608483 +03: signaling 'Logical system multiplexer process', pid 26909, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.608668 +03: notifying l2ald(121)
2022-02-01 12:07:29.618233 +03: signaling 'Layer 2 address flooding and learning process', pid 26867, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.618322 +03: notifying l2cpd(123)
2022-02-01 12:07:29.622139 +03: signaling 'Layer 2 Control Protocol process', pid 26880, signal 1, status 0 with notification errors enabled
2022-02-01 12:07:29.696133 +03: ssync begins
2022-02-01 12:07:29.705907 +03: ssync ends
2022-02-01 12:07:29.706161 +03: gram_private_edit - start
2022-02-01 12:07:29.926005 +03: gram_private_edit - done
2022-02-01 12:07:30.32082 +03: commit complete
commit complete
commit full¶
"commit full" - скрытая команда.
Нужна, чтобы проверить соответствие всего конфига.
Таким образом, все демоны(сервисы) - проверяют корректность своих настроек в соответствии со всем конфигом.
Это действие заставляет все сервисы проверить свои конфиги, а не только демоны, которые касаются только изменяемого куска конфига,
что делает просто "commit"
Пример commit full¶
commit full | display detail
"Можно посмотреть в деталях,"
"что происходит под капотом внутри коробки при применения commit full"
"Там еще больше интересного, чем в commit )"
"commit full | display detail"
2023-01-07 15:20:42 GMT-3: Obtaining lock for commit
2023-01-07 15:20:42 GMT-3: merging latest committed configuration
2023-01-07 15:20:42 GMT-3: Using fast-diff method to generate diff
2023-01-07 15:20:43 GMT-3: start loading commit script changes
2023-01-07 15:20:43 GMT-3: no commit script changes
2023-01-07 15:20:43 GMT-3: no transient commit script changes
2023-01-07 15:20:43 GMT-3: finished loading commit script changes
2023-01-07 15:20:43 GMT-3: copying juniper.db to juniper.data+
2023-01-07 15:20:43 GMT-3: finished copying juniper.db to juniper.data+
2023-01-07 15:20:43 GMT-3: exporting juniper.conf
2023-01-07 15:20:43 GMT-3: expanding interface-ranges
2023-01-07 15:20:43 GMT-3: finished expanding interface-ranges
2023-01-07 15:20:43 GMT-3: expanding groups
2023-01-07 15:20:43 GMT-3: finished expanding groups
2023-01-07 15:20:43 GMT-3: setup foreign files
2023-01-07 15:20:47 GMT-3: update license counters
2023-01-07 15:20:47 GMT-3: finish license counters
2023-01-07 15:20:47 GMT-3: propagating foreign files
2023-01-07 15:20:47 GMT-3: cdg returns = 8(Can not execute binary)
2023-01-07 15:20:49 GMT-3: complete foreign files
2023-01-07 15:20:49 GMT-3: dropping unchanged foreign files
2023-01-07 15:20:49 GMT-3: executing 'ffp propagate'
2023-01-07 15:20:49 GMT-3: daemons checking new configuration
2023-01-07 15:20:49 GMT-3: Spawning Routing protocols process to check new configuration
2023-01-07 15:20:49 GMT-3: Collecting status of Routing protocols process
2023-01-07 15:20:49 GMT-3: Spawning Init daemon to check new configuration
2023-01-07 15:20:49 GMT-3: Collecting status of Init daemon
2023-01-07 15:20:49 GMT-3: Spawning Chassis control process to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of Chassis control process
2023-01-07 15:20:50 GMT-3: Spawning Booting daemon to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of Booting daemon
2023-01-07 15:20:50 GMT-3: Spawning IPSec Key Management daemon to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of IPSec Key Management daemon
2023-01-07 15:20:50 GMT-3: Spawning PKI service daemon to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of PKI service daemon
2023-01-07 15:20:50 GMT-3: Spawning Secure Neighbor Discovery Protocol process to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of Secure Neighbor Discovery Protocol process
2023-01-07 15:20:50 GMT-3: Spawning Firewall process to check new configuration
2023-01-07 15:20:50 GMT-3: Collecting status of Firewall process
2023-01-07 15:20:50 GMT-3: sending commit-check command to Interface control process(1443)
2023-01-07 15:20:51 GMT-3: Collecting status of Interface control process
2023-01-07 15:20:51 GMT-3: Spawning Simple Network Management Protocol process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Simple Network Management Protocol process
2023-01-07 15:20:51 GMT-3: Spawning Management Information Base II process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Management Information Base II process
2023-01-07 15:20:51 GMT-3: Spawning Virtual Router Redundancy Protocol process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Virtual Router Redundancy Protocol process
2023-01-07 15:20:51 GMT-3: Spawning Alarm control process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Alarm control process
2023-01-07 15:20:51 GMT-3: Spawning Packet Forwarding Engine statistics management process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Packet Forwarding Engine statistics management process
2023-01-07 15:20:51 GMT-3: Spawning Remote operations process to check new configuration
2023-01-07 15:20:51 GMT-3: Collecting status of Remote operations process
2023-01-07 15:20:51 GMT-3: Spawning Class-of-service process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Class-of-service process
2023-01-07 15:20:52 GMT-3: Spawning Port forwarding process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Port forwarding process
2023-01-07 15:20:52 GMT-3: Spawning Web management gatekeeper process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Web management gatekeeper process
2023-01-07 15:20:52 GMT-3: Spawning Dynamic Host Configuration Protocol process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Dynamic Host Configuration Protocol process
2023-01-07 15:20:52 GMT-3: Spawning Redundancy interface management process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Redundancy interface management process
2023-01-07 15:20:52 GMT-3: Spawning Link Aggregation Control Protocol process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Link Aggregation Control Protocol process
2023-01-07 15:20:52 GMT-3: Spawning Connectivity fault management process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Connectivity fault management process
2023-01-07 15:20:52 GMT-3: Spawning Junos Dynamic Host Configuration Protocol process to check new configuration
2023-01-07 15:20:52 GMT-3: Collecting status of Junos Dynamic Host Configuration Protocol process
2023-01-07 15:20:52 GMT-3: Spawning General authentication process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of General authentication process
2023-01-07 15:20:53 GMT-3: Spawning Database Replication process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Database Replication process
2023-01-07 15:20:53 GMT-3: Spawning Resource cleanup process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Resource cleanup process
2023-01-07 15:20:53 GMT-3: Spawning Shared memory routing socket message database process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Shared memory routing socket message database process
2023-01-07 15:20:53 GMT-3: Spawning Subscriber management process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Subscriber management process
2023-01-07 15:20:53 GMT-3: Spawning Flow Sampling (Sflow) Daemon to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Flow Sampling (Sflow) Daemon
2023-01-07 15:20:53 GMT-3: Spawning Port based Network Access Control to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Port based Network Access Control
2023-01-07 15:20:53 GMT-3: Spawning Unified access control daemon to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Unified access control daemon
2023-01-07 15:20:53 GMT-3: Spawning Uplink failure detection process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Uplink failure detection process
2023-01-07 15:20:53 GMT-3: Spawning Logical system multiplexer process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Logical system multiplexer process
2023-01-07 15:20:53 GMT-3: Spawning Pragmatic General Multicast process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Pragmatic General Multicast process
2023-01-07 15:20:53 GMT-3: Spawning Bidirectional Forwarding Detection process to check new configuration
2023-01-07 15:20:53 GMT-3: Collecting status of Bidirectional Forwarding Detection process
2023-01-07 15:20:53 GMT-3: Spawning Service Deployment System (SDX) process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Service Deployment System (SDX) process
2023-01-07 15:20:54 GMT-3: Spawning Audit process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Audit process
2023-01-07 15:20:54 GMT-3: Spawning Event processing process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Event processing process
2023-01-07 15:20:54 GMT-3: Spawning Multicast Snooping process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Multicast Snooping process
2023-01-07 15:20:54 GMT-3: Spawning Feature license management process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Feature license management process
2023-01-07 15:20:54 GMT-3: Spawning Junos node unifier process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Junos node unifier process
2023-01-07 15:20:54 GMT-3: Spawning Link Layer Discovery Protocol to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Link Layer Discovery Protocol
2023-01-07 15:20:54 GMT-3: Spawning Ethernet Switching Process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Ethernet Switching Process
2023-01-07 15:20:54 GMT-3: Spawning Port based Network Access Control to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Port based Network Access Control
2023-01-07 15:20:54 GMT-3: Spawning Autoinstallation process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Autoinstallation process
2023-01-07 15:20:54 GMT-3: Spawning Connectivity fault management process to check new configuration
2023-01-07 15:20:54 GMT-3: Collecting status of Connectivity fault management process
2023-01-07 15:20:54 GMT-3: Spawning PKI service daemon to check new configuration
2023-01-07 15:20:55 GMT-3: Collecting status of PKI service daemon
2023-01-07 15:20:55 GMT-3: Spawning Chassis Manager to check new configuration
2023-01-07 15:20:55 GMT-3: Collecting status of Chassis Manager
2023-01-07 15:20:55 GMT-3: Spawning Virtual Chassis Control Protocol to check new configuration
2023-01-07 15:20:55 GMT-3: Collecting status of Virtual Chassis Control Protocol
2023-01-07 15:20:55 GMT-3: updating shared candidate configuration
2023-01-07 15:20:55 GMT-3: updating commit revision
configuration check succeeds
2023-01-07 15:20:55 GMT-3: executing 'ffp synchronize'
2023-01-07 15:20:55 GMT-3: commit wrapup...
2023-01-07 15:20:55 GMT-3: activating '/var/etc/init.inc'
2023-01-07 15:20:56 GMT-3: activating '/var/etc/ntp.conf'
2023-01-07 15:20:56 GMT-3: activating '/var/etc/bootpd.conf'
2023-01-07 15:20:56 GMT-3: activating '/var/etc/cosd.conf'
2023-01-07 15:20:57 GMT-3: start ffp activate
2023-01-07 15:20:57 GMT-3: executing 'ffp activate'
2023-01-07 15:20:57 GMT-3: activating '/var/etc/master.passwd'
2023-01-07 15:20:58 GMT-3: activating '/var/etc/inetd.conf'
2023-01-07 15:20:59 GMT-3: activating '/var/etc/rc.conf.inc'
2023-01-07 15:20:59 GMT-3: activating '/var/etc/keyadmin.conf'
2023-01-07 15:20:59 GMT-3: activating '/var/etc/sysids'
2023-01-07 15:20:59 GMT-3: activating '/var/etc/login.conf'
2023-01-07 15:21:00 GMT-3: activating '/var/etc/ttys'
2023-01-07 15:21:00 GMT-3: activating '/var/etc/resolv.conf'
2023-01-07 15:21:01 GMT-3: activating '/var/etc/hosts'
2023-01-07 15:21:01 GMT-3: activating '/var/etc/group'
2023-01-07 15:21:01 GMT-3: activating '/var/etc/ntp.keys'
2023-01-07 15:21:01 GMT-3: activating '/var/etc/newsyslog.conf'
2023-01-07 15:21:01 GMT-3: activating '/var/etc/pam.conf'
2023-01-07 15:21:02 GMT-3: activating '/var/etc/pam_radius.conf'
2023-01-07 15:21:02 GMT-3: activating '/var/etc/pam_tacplus.conf'
2023-01-07 15:21:03 GMT-3: activating '/var/etc/ifinfo.conf'
2023-01-07 15:21:04 GMT-3: activating '/var/etc/issue'
2023-01-07 15:21:04 GMT-3: activating '/var/etc/sshd_conf'
2023-01-07 15:21:04 GMT-3: activating '/var/etc/ssh_config'
2023-01-07 15:21:04 GMT-3: activating '/var/etc/certs'
2023-01-07 15:21:08 GMT-3: activating '/var/etc/motd'
2023-01-07 15:21:09 GMT-3: activating '/var/etc/tzset'
2023-01-07 15:21:09 GMT-3: activating '/var/etc/cosd.conf.id'
2023-01-07 15:21:10 GMT-3: activating '/var/etc/named.conf'
2023-01-07 15:21:10 GMT-3: activating '/var/etc/crontab'
2023-01-07 15:21:10 GMT-3: activating '/var/etc/ifmdata.conf'
2023-01-07 15:21:10 GMT-3: activating '/var/etc/max-db-size-cfg'
2023-01-07 15:21:10 GMT-3: activating '/var/etc/subs-mgmt-cfg'
2023-01-07 15:21:11 GMT-3: activating '/var/etc/vmm.conf'
2023-01-07 15:21:11 GMT-3: activating '/var/etc/db_ext-cfg'
2023-01-07 15:21:12 GMT-3: activating '/var/etc/stunnel.conf'
2023-01-07 15:21:14 GMT-3: activating '/var/etc/lighttpd.conf'
2023-01-07 15:21:14 GMT-3: activating '/var/etc/lighttpd.server.pem'
2023-01-07 15:21:14 GMT-3: activating '/var/etc/lighttpd.ca.cert'
2023-01-07 15:21:14 GMT-3: activating '/var/etc/lighttpd.addresses'
2023-01-07 15:21:15 GMT-3: activating '/var/etc/ephinst.conf'
2023-01-07 15:21:15 GMT-3: executing foreign_commands
2023-01-07 15:21:15 GMT-3: /bin/sh /etc/rc.ui ui_setup_users (sh)
2023-01-07 15:21:15 GMT-3: executing ui_commit in rc.ui
2023-01-07 15:21:20 GMT-3: finish ffp activate
2023-01-07 15:21:20 GMT-3: copying configuration to juniper.save
2023-01-07 15:21:20 GMT-3: db_check_constraint_ids_clear start
2023-01-07 15:21:20 GMT-3: db_check_constraint_ids_clear done
2023-01-07 15:21:20 GMT-3: db_groups_info_clear start
2023-01-07 15:21:20 GMT-3: db_groups_info_clear done
2023-01-07 15:21:20 GMT-3: activating '/var/run/db/juniper.data'
2023-01-07 15:21:20 GMT-3: Rotate backup configs
2023-01-07 15:21:26 GMT-3: ssync begins
2023-01-07 15:21:26 GMT-3: ssync ends
2023-01-07 15:21:26 GMT-3: notifying daemons of new configuration
2023-01-07 15:21:26 GMT-3: notifying none(0)
2023-01-07 15:21:26 GMT-3: cannot signal 'None process', signal 1, no pid
2023-01-07 15:21:26 GMT-3: notifying mgd(1)
2023-01-07 15:21:26 GMT-3: signaling 'Management process', pid 1421, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:26 GMT-3: notifying rpd(2)
2023-01-07 15:21:26 GMT-3: signaling 'Routing protocols process', pid 1452, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:26 GMT-3: notifying cli(3)
2023-01-07 15:21:26 GMT-3: cannot signal 'Command-line interface', signal 1, no pid
2023-01-07 15:21:26 GMT-3: notifying init(4)
2023-01-07 15:21:26 GMT-3: signaling 'Init daemon', pid 1, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:26 GMT-3: notifying chassisd(5)
2023-01-07 15:21:28 GMT-3: signaling 'Chassis control process', pid 1444, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying xntpd(6)
2023-01-07 15:21:28 GMT-3: signaling 'Network time process', pid 1449, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying bootpd(7)
2023-01-07 15:21:28 GMT-3: cannot signal 'Booting daemon', signal 1, no pid
2023-01-07 15:21:28 GMT-3: notifying kmd(8)
2023-01-07 15:21:28 GMT-3: cannot signal 'IPSec Key Management daemon', signal 1, no pid
2023-01-07 15:21:28 GMT-3: notifying pkid(10)
2023-01-07 15:21:28 GMT-3: signaling 'PKI service daemon', pid 1468, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying sendd(11)
2023-01-07 15:21:28 GMT-3: signaling 'Secure Neighbor Discovery Protocol process', pid 1465, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying dfwd(12)
2023-01-07 15:21:28 GMT-3: signaling 'Firewall process', pid 1458, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying dcd(13)
2023-01-07 15:21:28 GMT-3: signaling 'Interface control process', pid 1443, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying snmpd(14)
2023-01-07 15:21:28 GMT-3: signaling 'Simple Network Management Protocol process', pid 1450, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:28 GMT-3: notifying mib2d(15)
2023-01-07 15:21:29 GMT-3: signaling 'Management Information Base II process', pid 1451, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:29 GMT-3: notifying vrrpd(16)
2023-01-07 15:21:30 GMT-3: cannot signal 'Virtual Router Redundancy Protocol process', signal 1, no pid
2023-01-07 15:21:30 GMT-3: notifying alarmd(17)
2023-01-07 15:21:30 GMT-3: signaling 'Alarm control process', pid 1445, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:30 GMT-3: notifying pfed(18)
2023-01-07 15:21:31 GMT-3: signaling 'Packet Forwarding Engine statistics management process', pid 1454, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:31 GMT-3: notifying rmopd(21)
2023-01-07 15:21:32 GMT-3: signaling 'Remote operations process', pid 1455, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:32 GMT-3: notifying cosd(22)
2023-01-07 15:21:32 GMT-3: signaling 'Class-of-service process', pid 1456, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:32 GMT-3: notifying fud(23)
2023-01-07 15:21:33 GMT-3: cannot signal 'Port forwarding process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying ksyncd(24)
2023-01-07 15:21:33 GMT-3: cannot signal 'Kernel replication process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying inetd(25)
2023-01-07 15:21:33 GMT-3: signaling 'Inet process', pid 1422, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying httpd-gk(26)
2023-01-07 15:21:33 GMT-3: cannot signal 'Web management gatekeeper process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying dhcpd(27)
2023-01-07 15:21:33 GMT-3: cannot signal 'Dynamic Host Configuration Protocol process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying rdd(28)
2023-01-07 15:21:33 GMT-3: signaling 'Redundancy interface management process', pid 1461, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying lacpd(29)
2023-01-07 15:21:33 GMT-3: signaling 'Link Aggregation Control Protocol process', pid 1464, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying lfmd(30)
2023-01-07 15:21:33 GMT-3: signaling 'Ethernet OAM Link-Fault-Management process', pid 1447, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying tnetd(32)
2023-01-07 15:21:33 GMT-3: cannot signal 'TNP process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying cfmd(33)
2023-01-07 15:21:33 GMT-3: signaling 'Connectivity fault management process', pid 1448, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying jdhcpd(34)
2023-01-07 15:21:33 GMT-3: signaling 'Junos Dynamic Host Configuration Protocol process', pid 1469, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying authd(35)
2023-01-07 15:21:33 GMT-3: signaling 'General authentication process', pid 1470, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying rpcbind(36)
2023-01-07 15:21:33 GMT-3: cannot signal 'Service for rpc requests', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying mountd(37)
2023-01-07 15:21:33 GMT-3: cannot signal 'Service for NFS mounts requests', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying bdbrepd(38)
2023-01-07 15:21:33 GMT-3: signaling 'Database Replication process', pid 1462, signal 1, status 0 with notification errors disabled
2023-01-07 15:21:33 GMT-3: notifying res-cleanupd(39)
2023-01-07 15:21:33 GMT-3: cannot signal 'Resource cleanup process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying shm-rtsdbd(40)
2023-01-07 15:21:33 GMT-3: signaling 'Shared memory routing socket message database process', pid 1467, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying datapath-traced(41)
2023-01-07 15:21:33 GMT-3: cannot signal 'DATAPATH Trace process', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying smid(42)
2023-01-07 15:21:33 GMT-3: signaling 'Subscriber management process', pid 1460, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying gstatd(44)
2023-01-07 15:21:33 GMT-3: cannot signal 'geom-device performance monitoring daemon', signal 1, no pid
2023-01-07 15:21:33 GMT-3: notifying sflowd(45)
2023-01-07 15:21:33 GMT-3: signaling 'Flow Sampling (Sflow) Daemon', pid 1473, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying dot1xd(46)
2023-01-07 15:21:33 GMT-3: signaling 'Port based Network Access Control', pid 1474, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:33 GMT-3: notifying uacd(47)
2023-01-07 15:21:34 GMT-3: cannot signal 'Unified access control daemon', signal 1, no pid
2023-01-07 15:21:34 GMT-3: notifying ufdd(50)
2023-01-07 15:21:34 GMT-3: cannot signal 'Uplink failure detection process', signal 1, no pid
2023-01-07 15:21:34 GMT-3: notifying ppmd(52)
2023-01-07 15:21:34 GMT-3: signaling 'Periodic packet management process', pid 1457, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying lrmuxd(54)
2023-01-07 15:21:34 GMT-3: cannot signal 'Logical system multiplexer process', signal 1, no pid
2023-01-07 15:21:34 GMT-3: notifying pgmd(57)
2023-01-07 15:21:34 GMT-3: cannot signal 'Pragmatic General Multicast process', signal 1, no pid
2023-01-07 15:21:34 GMT-3: notifying bfdd(58)
2023-01-07 15:21:34 GMT-3: signaling 'Bidirectional Forwarding Detection process', pid 1459, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying sdxd(59)
2023-01-07 15:21:34 GMT-3: cannot signal 'Service Deployment System (SDX) process', signal 1, no pid
2023-01-07 15:21:34 GMT-3: notifying auditd(60)
2023-01-07 15:21:34 GMT-3: signaling 'Audit process', pid 1463, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying eventd(62)
2023-01-07 15:21:34 GMT-3: signaling 'Event processing process', pid 1070, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying mcsnoopd(63)
2023-01-07 15:21:34 GMT-3: signaling 'Multicast Snooping process', pid 1475, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying license-check(65)
2023-01-07 15:21:34 GMT-3: signaling 'Feature license management process', pid 1476, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:34 GMT-3: notifying commitd(66)
2023-01-07 15:21:35 GMT-3: cannot signal 'Ephemeral Controller Daemon', signal 1, no pid
2023-01-07 15:21:35 GMT-3: notifying jnud(67)
2023-01-07 15:21:35 GMT-3: cannot signal 'Junos node unifier process', signal 1, no pid
2023-01-07 15:21:35 GMT-3: notifying rest-api(68)
2023-01-07 15:21:35 GMT-3: cannot signal 'REST Application Programming Interface process', signal 1, no pid
2023-01-07 15:21:35 GMT-3: notifying ntad(69)
2023-01-07 15:21:36 GMT-3: cannot signal 'Network Topology Abstraction Daemon', signal 1, no pid
2023-01-07 15:21:36 GMT-3: notifying lldpd(70)
2023-01-07 15:21:36 GMT-3: signaling 'Link Layer Discovery Protocol', pid 1477, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:36 GMT-3: notifying lfmd(71)
2023-01-07 15:21:37 GMT-3: signaling 'Ethernet OAM Link-Fault-Management process', pid 1447, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:37 GMT-3: notifying eswd(72)
2023-01-07 15:21:37 GMT-3: signaling 'Ethernet Switching Process', pid 1466, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:37 GMT-3: notifying dot1xd(73)
2023-01-07 15:21:38 GMT-3: signaling 'Port based Network Access Control', pid 1474, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:38 GMT-3: notifying autod(74)
2023-01-07 15:21:38 GMT-3: cannot signal 'Autoinstallation process', signal 1, no pid
2023-01-07 15:21:38 GMT-3: notifying cfmd(75)
2023-01-07 15:21:38 GMT-3: signaling 'Connectivity fault management process', pid 1448, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:38 GMT-3: notifying pkid(76)
2023-01-07 15:21:38 GMT-3: signaling 'PKI service daemon', pid 1468, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:38 GMT-3: notifying chassism(77)
2023-01-07 15:21:38 GMT-3: signaling 'Chassis Manager', pid 1424, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:38 GMT-3: notifying sfid(78)
2023-01-07 15:21:38 GMT-3: signaling 'Software Forwarding', pid 1425, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:38 GMT-3: notifying vccpd(79)
2023-01-07 15:21:39 GMT-3: signaling 'Virtual Chassis Control Protocol', pid 1426, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:39 GMT-3: notifying pfem(80)
2023-01-07 15:21:39 GMT-3: signaling 'Packet Forwarding Engine Manager', pid 1427, signal 1, status 0 with notification errors enabled
2023-01-07 15:21:40 GMT-3: ssync begins
2023-01-07 15:21:41 GMT-3: ssync ends
2023-01-07 15:21:41 GMT-3: gram_private_edit - start
2023-01-07 15:21:43 GMT-3: gram_private_edit - done
2023-01-07 15:21:43 GMT-3: commit complete
commit complete
commit confirm [minite]¶
"Применить изменения с их автоматическим откатом через определенное время"
"Очень удобно если не уверен, что твой комит не поломает доступ к устройству."
"Например команда полезна при работах на правилах copp на firewall."
commit confirm 5
"если всё плохо - через 5 минут конфиг откатится сам назад."
"если все хорошо, то можно сделать просто "commit" сохранив таким образом существующую конфигурацию."
commit
show system commit¶
"Просмотр существующих коммиттов"
show system commit
0 2022-02-16 21:55:12 +03 by user1 via cli commit synchronize
1 2022-02-16 18:47:49 +03 by user2 via cli commit synchronize
2 2022-02-16 18:34:24 +03 by user3 via cli commit synchronize
3 2022-02-16 18:32:14 +03 by user4 via cli commit synchronize
Просмотр диффа между коммиттами¶
Пример 1¶
"Например, если последним действием поменяли local-preference с 200 на 250,"
"то для просмотра, что именно поменялось можно использовать конструкция такого типа:"
show system rollback compare 1 0
[edit policy-options policy-statement policy1 term local-preference then]
- local-preference 200;
+ local-preference 250;
Пример 2¶
"Соответственно, чтобы посмотреть что было изменено во 2ом коммите,"
"то можно использовать конструкция такого типа:"
show system rollback compare 2 1
[edit interfaces ae0 unit 1111 family ccc policer]
+ input 500Mbit;
"В данном случае во втором коммитте был добавлен только полисер на 500Mbit"
"больше ничего не изменялось."
Просмотр определения SFP модулей¶
show chassis hardware
"show chassis hardware"
Hardware inventory:
Item Version Part number Serial number Description
Chassis xxxxxxxxxxxxx MX960
Midplane REV 04 750-047853 ACRC5864 Enhanced MX960 Backplane
Fan Extender REV 02 710-018051 CACF3080 Extended Cable Manager
FPM Board REV 03 710-014974 CACW7761 Front Panel Display
PDM Rev 03 740-013110 QCS1743504L Power Distribution Module
PEM 0 Rev 11 740-027760 QCS1740N1AF PS 4.1kW; 200-240V AC in
PEM 1 Rev 11 740-027760 QCS1810N02J PS 4.1kW; 200-240V AC in
PEM 2 Rev 11 740-027760 QCS1828N0M4 PS 4.1kW; 200-240V AC in
PEM 3 Rev 11 740-027760 QCS1803N06W PS 4.1kW; 200-240V AC in
Routing Engine 0 REV 08 750-072923 CARM8425 RE-S-2X00x6
Routing Engine 1 REV 08 750-072923 CARX5296 RE-S-2X00x6
CB 0 REV 13 750-062572 CARP0477 Enhanced MX SCB 2
CB 1 REV 15 750-062572 CARZ5165 Enhanced MX SCB 2
FPC 0 REV 10 750-063181 CAJM4835 MPC3E NG PQ & Flex Q
CPU REV 13 711-045719 CAJL1109 RMPC PMB
MIC 0 REV 36 750-028392 CAHP1766 3D 20x 1GE(LAN) SFP
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) SFP
Xcvr 0 NON-JNPR PC3K350482 SFP-LX10
Xcvr 1 NON-JNPR W1806262166 SFP-FC1G-LW
Xcvr 2 } NON-JNPR W20042016938 SFP-FC1G-LW
Xcvr 3 NON-JNPR PB8V093240 SFP-LX10
Xcvr 4 NON-JNPR H17A16130281 SFP-LX10
Xcvr 5 NON-JNPR P13A00500167 SFP-LX10
Xcvr 6 NON-JNPR C17A11050035 SFP-LX10
Xcvr 7 NON-JNPR S14A05420163 SFP-LX10
Xcvr 8 2K NON-JNPR W2104080422 SFP-FC1G-LW
Xcvr 9 tPh NON-JNPR W19111207024 SFP-FC1G-LW
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) SFP
Xcvr 0 NON-JNPR C1005040443 UNSUPPORTED
Xcvr 1 v NON-JNPR C1102180518 SFP-LR
Xcvr 2 NON-JNPR SAAA410006 UNSUPPORTED
Xcvr 3 NON-JNPR C1012010120 UNSUPPORTED
Xcvr 4 NON-JNPR SD4G670550 SFP-LX10
Xcvr 5 , NON-JNPR W2108246604 SFP-FC1G-LW
Xcvr 6 O[Y+ NON-JNPR 5300048 SFP-EX
Xcvr 7 NON-JNPR C16A08390084 SFP-LX10
Xcvr 8 NON-JNPR PB8P170054 SFP-LX10
Xcvr 9 NON-JNPR 0711021785 SFP-1000BASE-BX10-U
MIC 1 REV 36 750-028392 CAHA0737 3D 20x 1GE(LAN) SFP
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) SFP
Xcvr 5 NON-JNPR C16A08390098 SFP-LX10
Xcvr 6 NON-JNPR SD6V310622 SFP-LX10
Xcvr 7 OMPATI NON-JNPR 9420989017 SFP-EX
Xcvr 8 g NON-JNPR FT201310171745 SFP-FC1G-LW
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) SFP
FPC 1 REV 10 750-063181 CAJK5471 MPC3E NG PQ & Flex Q
CPU REV 13 711-045719 CAJK0087 RMPC PMB
MIC 0 REV 25 750-028392 ZB3807 3D 20x 1GE(LAN) SFP
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) SFP
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) SFP
MIC 1 REV 22 750-028392 YM6347 3D 20x 1GE(LAN) SFP
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) SFP
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) SFP
FPC 3 REV 31 750-037358 CAEH9485 MPC4E 3D 32XGE
CPU REV 10 711-035209 CAEN7738 HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 REV 01 740-021308 PM2NG41211 SFP+-10G-LR
Xcvr 1 REV 01 740-021308 PM2NG41213 SFP+-10G-LR
Xcvr 2 REV 01 740-021308 PM2NG41212 SFP+-10G-LR
Xcvr 3 REV 01 740-021308 PM2NG41218 SFP+-10G-LR
PIC 1 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 REV 01 740-021309 W2112140548 SFP+-10G-LR
Xcvr 1 REV 01 740-021309 ASELRN109 SFP+-10G-LR
PIC 2 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 REV 01 740-021308 PM2NG41216 SFP+-10G-LR
PIC 3 BUILTIN BUILTIN 8X10GE SFPP
Xcvr 0 NON-JNPR SD7W300018 SFP+-10G-SR
FPC 9 REV 09 750-063181 CAJF3149 MPC3E NG PQ & Flex Q
CPU REV 13 711-045719 CAJE9808 RMPC PMB
MIC 0 REV 15 750-028390 CABE1696 3D 40x 1GE(LAN) RJ45
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
FPC 10 REV 10 750-063181 CAJM4603 MPC3E NG PQ & Flex Q
CPU REV 13 711-045719 CAJL1464 RMPC PMB
MIC 0 REV 15 750-028390 CABE1690 3D 40x 1GE(LAN) RJ45
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
FPC 11 REV 10 750-063181 CAJM4545 MPC3E NG PQ & Flex Q
CPU REV 13 711-045719 CAJL1494 RMPC PMB
MIC 0 REV 15 750-028390 CABE1693 3D 40x 1GE(LAN) RJ45
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 2 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
PIC 3 BUILTIN BUILTIN 10x 1GE(LAN) RJ45
Fan Tray 0 REV 08 740-031521 ACDB2692 Enhanced Fan Tray
Fan Tray 1 REV 08 740-031521 ACDB2398 Enhanced Fan Tray
Просмотр уровней для оптических модулей¶
Без матчинга¶
show interfaces diagnostics optics ge-0/0/1
"show interfaces diagnostics optics ge-0/0/1"
Physical interface: ge-0/0/1
Laser bias current : 19.216 mA
Laser output power : 0.2190 mW / -6.60 dBm
Module temperature : 20 degrees C / 67 degrees F
Module voltage : 3.3690 V
Laser receiver power : 0.0398 mW / -14.00 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 80.000 mA
Laser bias current low alarm threshold : 10.000 mA
Laser bias current high warning threshold : 75.000 mA
Laser bias current low warning threshold : 12.000 mA
Laser output power high alarm threshold : 1.2580 mW / 1.00 dBm
Laser output power low alarm threshold : 0.0500 mW / -13.01 dBm
Laser output power high warning threshold : 1.0000 mW / 0.00 dBm
Laser output power low warning threshold : 0.0630 mW / -12.01 dBm
Module temperature high alarm threshold : 95 degrees C / 203 degrees F
Module temperature low alarm threshold : -50 degrees C / -58 degrees F
Module temperature high warning threshold : 90 degrees C / 194 degrees F
Module temperature low warning threshold : -40 degrees C / -40 degrees F
Module voltage high alarm threshold : 3.900 V
Module voltage low alarm threshold : 2.700 V
Module voltage high warning threshold : 3.700 V
Module voltage low warning threshold : 2.900 V
Laser rx power high alarm threshold : 0.6310 mW / -2.00 dBm
Laser rx power low alarm threshold : 0.0010 mW / -30.00 dBm
Laser rx power high warning threshold : 0.5012 mW / -3.00 dBm
Laser rx power low warning threshold : 0.0013 mW / -28.86 dBm
С матчингом¶
show interfaces diagnostics optics ge-0/0/1 | match "rece|rx"
show interfaces diagnostics optics ge-0/0/1 | match "rece|rx"
Laser receiver power : 0.0398 mW / -14.00 dBm
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser rx power high alarm threshold : 0.6310 mW / -2.00 dBm
Laser rx power low alarm threshold : 0.0010 mW / -30.00 dBm
Laser rx power high warning threshold : 0.5012 mW / -3.00 dBm
Laser rx power low warning threshold : 0.0013 mW / -28.86 dBm
show interfaces diagnostics optics ge-0/0/1 | match "Laser o"
show interfaces diagnostics optics ge-0/0/1 | match "Laser o"
Laser output power : 0.2190 mW / -6.60 dBm
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Laser output power high alarm threshold : 1.2580 mW / 1.00 dBm
Laser output power low alarm threshold : 0.0500 mW / -13.01 dBm
Laser output power high warning threshold : 1.0000 mW / 0.00 dBm
Laser output power low warning threshold : 0.0630 mW / -12.01 dBm
Сохранения конфига:¶
Способ №1¶
request system configuration rescue save
"request system configuration rescue save"
"сохраняет в /config"
ls -la /config | grep rescue.conf.gz
-rw-r----- 1 root wheel 3030 Jan 3 11:33 rescue.conf.gz
Способ №2¶
save
configure private
save /var/tmp/ex-4200-24t.conf
Загрузка конфига из файла.¶
"Из конфигурационного режима"
load override /var/tmp/ex-4200-24t.conf
show | compare
Очистка конфига.¶
Способ №1¶
load factory defaults
"Очищает только конфиг на дефолт"
"load factory defaults"
commit check
[edit]
'system'
Missing mandatory statement: 'root-authentication'
error: configuration check-out failed: (missing mandatory statements)
"нельзя провести коммит если не задан root учетка"
set system root-authentication plain-text-password
commit
"Не пускает под рутом, надо перезагрузиться тогда все будет ок"
start shell
% su root
su: who are you?
% exit
Способ №2¶
request system zeroize
"Очищает только конфиг + чистит диск от лишнего"
"request system zeroize"
warning: System will be rebooted and may not boot without configuration
Erase all data, including configuration and log files? [yes,no] (no) yes
warning: ipsec-key-management subsystem not running - not needed by configuration.
warning: zeroizing fpc0
"!!! после перезагрузки пароль root пустой..."
"для задания пароля после входя надо"
"set system root-authentication plain-text-password"
Способ №3 - лайтовый¶
При этом способе просто удаляетс явсе содержимое конфига
"delete"
Заведение нового пользователя¶
set system login user bar class super-user
set system login user bar authentication plain-text-password
Корректно потушить Juniper¶
request system halt
replace and copy¶
Если есть задачка перетащить настройки с одного интерфейса на другой или просто их скопировать, то в Juniper-е на помощь приходят команды "replace" и "copy"
Либо в более общем случае заменить один паттерн на другой (например, определенный дескрипшен на другой, повторяющийся много раз в конфиге)
replace¶
"replace pattern PATTERN1 with PATTERN2"
Работает как замена одного "PATTERN1" на "PATTERN2" во всей конфигурации
при этом "PATTERN2" не должно быть в конфиге иначе возникнет ошибка вида:
"user@MX# replace pattern ge-10/3/5 with ge-10/0/6"
error: target statement 'ge-10/0/6' already exists
[edit interfaces]
'ge-10/3/5'
could not rename to 'ge-10/0/6'
"user@MX> show configuration | display set | match ge-10/0/6"
set interfaces ge-10/0/6 description "MY DESCRIPTION HERE"
Если упоминания ge-10/0/6 в конфиге нет, то тогда:
В данном куске конфига можно заменить "ge-10/3/5" на "ge-10/0/6"
"user@MX> show configuration | display set | match ge-10/3/5"
set interfaces ge-10/3/5 description "!JP ISP"
set interfaces ge-10/3/5 flexible-vlan-tagging
set interfaces ge-10/3/5 mtu 9216
set interfaces ge-10/3/5 encapsulation flexible-ethernet-services
set interfaces ge-10/3/5 unit 999 description "L2VPN 999"
set interfaces ge-10/3/5 unit 999 encapsulation vlan-bridge
set interfaces ge-10/3/5 unit 999 vlan-id 999
set interfaces ge-10/3/5 unit 111 description "L2VPN 111"
set interfaces ge-10/3/5 unit 111 encapsulation vlan-bridge
set interfaces ge-10/3/5 unit 111 vlan-id 111
set routing-instances EVPN9 bridge-domains VL0999 interface ge-10/3/5.999
set routing-instances EVPN1 bridge-domains VL0111 interface ge-10/3/5.111
"user@MX> configure private"
"user@MX# replace pattern ge-10/3/5 with ge-10/0/6"
ИТОГО:
"user@MX# show | compare"
[edit interfaces]
+ ge-10/0/6 {
+ description "!JP ISP";
+ flexible-vlan-tagging;
+ mtu 9216;
+ encapsulation flexible-ethernet-services;
+ unit 999 {
+ description "L2VPN 999";
+ encapsulation vlan-bridge;
+ vlan-id 999;
+ }
+ unit 111 {
+ description "L2VPN 111";
+ encapsulation vlan-bridge;
+ vlan-id 111;
+ }
+ }
- ge-10/3/5 {
- description "!JP ISP";
- flexible-vlan-tagging;
- mtu 9216;
- encapsulation flexible-ethernet-services;
- unit 999 {
- description "L2VPN 999";
- encapsulation vlan-bridge;
- vlan-id 999;
- }
- unit 111 {
- description "L2VPN 111";
- encapsulation vlan-bridge;
- vlan-id 111;
- }
- }
[edit routing-instances EVPN9 bridge-domains VL0999]
+ interface ge-10/0/6.999;
interface ae1.999 { ... }
[edit routing-instances EVPN9 bridge-domains VL0999]
- interface ge-10/3/5.999;
[edit routing-instances EVPN1 bridge-domains VL0111]
+ interface ge-10/0/6.111;
- interface ge-10/3/5.111;
copy interface¶
"Работает как копирование настроек одного интерфейска на другой"
Скопируем настройки данного интерфейса на другой
"user@MX# run show configuration interfaces ge-10/3/5 | display set"
set interfaces ge-10/3/5 description "!JP ISP"
set interfaces ge-10/3/5 flexible-vlan-tagging
set interfaces ge-10/3/5 mtu 9216
set interfaces ge-10/3/5 encapsulation flexible-ethernet-services
set interfaces ge-10/3/5 unit 999 description "L2VPN 999"
set interfaces ge-10/3/5 unit 999 encapsulation vlan-bridge
set interfaces ge-10/3/5 unit 999 vlan-id 999
set interfaces ge-10/3/5 unit 111 description "L2VPN 111"
set interfaces ge-10/3/5 unit 111 encapsulation vlan-bridge
set interfaces ge-10/3/5 unit 111 vlan-id 111
"user@MX# copy interfaces ge-10/3/5 to ge-10/0/6"
ИТОГО:
"user@MX# show | compare"
[edit interfaces]
+ ge-10/0/6 {
+ description "!JP ISP";
+ flexible-vlan-tagging;
+ mtu 9216;
+ encapsulation flexible-ethernet-services;
+ unit 999 {
+ description "L2VPN 999";
+ encapsulation vlan-bridge;
+ vlan-id 999;
+ }
+ unit 111 {
+ description "L2VPN 111";
+ encapsulation vlan-bridge;
+ vlan-id 111;
+ }
+ }
Мелкие "приколюхи"¶
Чат между пользователями коробки¶
Список пользователей
"alex@Juniper> show system users"
5:40PM up 458 days, 15:20, 6 users, load averages: 0.76, 0.88, 0.77
USER TTY FROM LOGIN@ IDLE WHAT
alex pts/0 1.1.1.1 10:41AM 3:09 -cl
max pts/1 1.1.1.1 10:56AM 6:44 -cl
vova pts/2 1.1.1.1 10:49AM 6:47 -cl
kirill pts/2 1.1.1.1 10:49AM 6:47 -cl
Пользоваьтель alex отправляет пользователь kirill сообщение:
"alex@Juniper> request message message "hi there!" kirill"
Пользоваьтель kirill получает сообщение от пользователя alex:
kirill@Juniper> request message terminal
Message from alex@Juniper on pts/5 at 17:14 ...
Hello WTFIGO! )
EOF
?
Последнее обновление: 2023-05-29